文章
Miss Chen
2018年03月22日
Blanching is a process in which foods are scalded briefly then cooled down immediately to allow them to be stay fresh longer and prevent discoloration. It can be time consuming and is not always necessary. If you spend a lot of time in the garden already, you likely want to get your harvest sealed up and stored as easily and quickly as possible. If done correctly, you can freeze unblanched raw cabbage for up to several weeks without compromising its natural texture and flavor.
Step 1
Wash each head of cabbage thoroughly with lukewarm water to remove any dirt. Pat dry with a soft towel.
Step 2
Cut each head into quarters. You should be left with four wedges for each head of cabbage.
Step 3
Individually wrap each quarter with clear plastic wrap. Make sure there are no gaps in the plastic where air can reach the cabbage. Place the individually wrapped wedges in freezer bags.
Step 4
Write the cabbage harvest date on each freezer bag with permanent marker. Place in a freezer and use within three months.
Step 1
Wash each head of cabbage thoroughly with lukewarm water to remove any dirt. Pat dry with a soft towel.
Step 2
Cut each head into quarters. You should be left with four wedges for each head of cabbage.
Step 3
Individually wrap each quarter with clear plastic wrap. Make sure there are no gaps in the plastic where air can reach the cabbage. Place the individually wrapped wedges in freezer bags.
Step 4
Write the cabbage harvest date on each freezer bag with permanent marker. Place in a freezer and use within three months.
0
0
文章
Miss Chen
2018年03月22日
Collard greens are lush, leafy vegetables that thrive in warm weather and serve as nutritious crops for a vegetable garden. Although they are cool-weather crops, tolerant of frost and averse to sweltering heat, collard greens are susceptible to bolting when temperatures are too low. When the flowering stalk shoots up from collards, optimal leaf flavor may be lost. All you can do to try to save the greens is cut the flowering stem.
Bolting
Bolting, or the development of a flowering stalk, occurs in all types of leafy vegetables for various reasons. As it occurs, the leaves diminish in size and grow bitter. Leaves grow inedible as energy flows to flowers and stalks. In the case of collard greens, bolting occurs when it is planted too early in spring, when temperatures are too cold. Some collard varieties are slow to bolt, including Georgia LS and Flash.
What to Do
The best advice when confronted with bolting collards is to immediately harvest the leaves or attempt to slow the bolting by removing the flower stalks. Bolting does not mean your harvest is lost, although it can diminish the collard greens' flavor. You will probably be unable to prevent the bolting from occurring, as it is a reaction to environmental conditions over time. The more a collard green plant develops its flower stalk, the less edible the greens will be, so it's beneficial to harvest as quick as possible to retain as much flavor and nutrition as possible.
Prevention
To prevent bolting, gowers must avoid planting collard greens, like any other cole crop, too early. Sow seeds in early spring to harvest in summer, or midway through summer for a fall/early winter harvest. Avoid planting if temperatures are expected to be below 50 F over an extended time. Select varieties of collards that are especially resistant to bolting, as listed above. Remove flowering stalks and stems as they emerge to encourage energy production in leaves.
Harvest
If all goes well, harvested collard greens will be smooth, large and nutritious. All green parts of the plant are edible. Collard greens are a low-calorie source of numerous minerals and vitamins including vitamins A, C and K. Tough and fibrous, they require lots of cooking, which turns their leaves dark green. You can harvest collard greens by cutting down entire plants or by pulling off large leaves as they develop.
Bolting
Bolting, or the development of a flowering stalk, occurs in all types of leafy vegetables for various reasons. As it occurs, the leaves diminish in size and grow bitter. Leaves grow inedible as energy flows to flowers and stalks. In the case of collard greens, bolting occurs when it is planted too early in spring, when temperatures are too cold. Some collard varieties are slow to bolt, including Georgia LS and Flash.
What to Do
The best advice when confronted with bolting collards is to immediately harvest the leaves or attempt to slow the bolting by removing the flower stalks. Bolting does not mean your harvest is lost, although it can diminish the collard greens' flavor. You will probably be unable to prevent the bolting from occurring, as it is a reaction to environmental conditions over time. The more a collard green plant develops its flower stalk, the less edible the greens will be, so it's beneficial to harvest as quick as possible to retain as much flavor and nutrition as possible.
Prevention
To prevent bolting, gowers must avoid planting collard greens, like any other cole crop, too early. Sow seeds in early spring to harvest in summer, or midway through summer for a fall/early winter harvest. Avoid planting if temperatures are expected to be below 50 F over an extended time. Select varieties of collards that are especially resistant to bolting, as listed above. Remove flowering stalks and stems as they emerge to encourage energy production in leaves.
Harvest
If all goes well, harvested collard greens will be smooth, large and nutritious. All green parts of the plant are edible. Collard greens are a low-calorie source of numerous minerals and vitamins including vitamins A, C and K. Tough and fibrous, they require lots of cooking, which turns their leaves dark green. You can harvest collard greens by cutting down entire plants or by pulling off large leaves as they develop.
0
0
成长记
plantwallgoal
2018年03月21日
I now added "String of pearls (Senecio rowleyanus)" in my "garden"
0
0
